E36 RACING STEERING SHAFT

Have slop in your steering?  Has your lower u joint wore out?  We set out to solve this, and worked with a company that makes steering components for NASCAR.  These high quality u joints are made specifically for the E36 BMW chassis.  These u joints use caged needle bearings with a slight preload to completely eliminate backlash.  The bearing trunnion is a single piece of hardened chromevanadium tool steel. The grease seals are high-durometer fluorocarbon o-rings in compression against the end surfaces of the needle bearing cups. This means the seals will resist sustained ovenlevel heat and will retain the bearing grease under severe conditions.

 

Available as two options:

  1. Lower U Joint Replacement
  2. Complete Racing Steering Shaft

 

*Off-Road use only

 

Click HERE to Download Instructions

 

**PLEASE NOTE: To be able to achieve the most direct steering feel, our u joints are precisely machined to have the least amount of play.  The OEM u joint uses a pinch bolt, making the tolerances a lot larger when installing.  Our u joints use set screws and the tolerances are a higher to reduce any slop in the steering.  Please make sure your splines are cleaned and not marred up.  You may need to tap the u joint on with a rubber or dead blow hammer.  Please do not use a metal hammer to hit the steering shaft on.  If for any reason you can not get the u joint on, do not force, and email us at info@racegerman.com

 

E36 RACING STEERING SHAFT

$95.00Price
CHOOSE YOUR KIT
    • E36 Racing Steering Shaft
    • Eliminates Backlash
    • Zinc Coated to Prevent Corrosion
    • Off-Road Use Only
    • Made in the USA

OTHER ITEMS YOU MAY BE INTERESTED IN:

RACE GERMAN
WWW.RACEGERMAN.COM
VISIT US ON SOCIAL MEDIA
  • Facebook Social Icon
  • Instagram Social Icon
  • YouTube Social  Icon
  • Twitter Social Icon
  • Pinterest Social Icon

© 2016-2020 Race German LLC | Terms & Conditions | Return Policy