E36 Steering Rack Swap Kit (Non Airbag)

Swapping an E36, E46, Z3 steering rack into your early model (non airbag) E30 is a great upgrade. These steering racks feature a closer ratio lock to lock, which will increase steering feel and responsiveness, especially on track. This kit includes everything you need for a early model (non airbag) E30.
 
Kit Includes:

• Steering Shaft Spacers
• Black Oxide Coated Bolts
• Zinc Coated Nylon Locking Nuts
• Steering Rack to Subframe Spacers
• Stainless Steel Firewall Plate (Optional)

 

*The two steering rack to subframe spacers will go above the steering rack

**The stainless steel firewall plate is optional but highly recommended to ensure rubbing of the steering shaft through the firewall does not exist. A small section of the firewall will need to be cut.  The plate will attach on the inside of the car.  This essentially moves the firewall steering boot down and to the right to prevent the shaft from rubbing on the firewall. 

***You will need to use a 13/32 or 10mm drill to slightly open the holes on the steering u joint to fit the bolts properly.

 
If you are looking for the airbag version: CLICK HERE